Trade Cracked, Uneven Surfaces for Concrete That Lasts
Under federal ADA standards, a change in level of more than 1/4 inch on a walking surface needs a bevel, and anything over 1/2 inch must be treated as a ramp, so one heaved slab can become a liability. Mantek LLC handles concrete removal and replacement for sidewalks, driveways, parking areas, loading zones, and equipment pads, tearing out failing sections and rebuilding them properly. We work across Mobile, AZ, Goodyear, Avondale, and Buckeye.
We bring 11+ years of concrete experience to replacement work, and that history taught us to fix the cause, not just the surface. Every project starts by checking the base, drainage, and reinforcement that let the old concrete fail. From there, we plan careful phasing that keeps your property usable and price the work transparently. Request your free estimate through our contact page, and we will explain exactly what your concrete needs and why it matters.
Explore Our Concrete Replacement Services
Damaged Concrete Removal
Broken, sunken, or deteriorated sections are saw-cut along clean lines and removed without disturbing the surrounding surfaces that remain in good condition. Debris is loaded and hauled away promptly, leaving an open, orderly area ready for base work.
Surface Replacement
New sidewalks, driveways, parking areas, and slabs are formed and poured to match the grades and edges around them. Each replacement is built for the traffic it will actually carry, restoring a smooth, safe surface that ties cleanly into existing pavement.
Base Preparation
Most concrete failures start underground, where soft, washed-out, or poorly compacted material leaves slabs unsupported. Rebuilding and compacting that base in lifts gives the new concrete firm, even support, which is the single biggest factor in how long it lasts.
Reinforcement and Finishing
Steel reinforcement helps concrete hold together under load and control cracking as it cures. Careful finishing then adds the right texture, clean edges, and properly spaced joints, producing a surface that performs well and looks sharp for years.
Commercial Concrete Replacement
Aging concrete at retail centers, industrial facilities, and municipal sites is replaced in coordinated phases around daily operations. Access routes, signage, and pour sequencing are planned so tenants, customers, and deliveries keep moving while each new section cures.
Drainage and Grade Corrections
Water that pooled on or beneath the old surface will ruin the new one too. Adjusting slopes, adding drains, or redirecting runoff during replacement removes that cause, protecting the fresh concrete and the base beneath it from repeat damage.
Signs It Is Time to Replace, Not Patch
Wide or Spreading Cracks
Hairline cracks are common, but cracks that widen, lengthen, or show displacement between sides point to deeper movement. Once the slab separates into independent pieces, patching simply hides a problem that keeps growing beneath the surface with every season.
Sunken or Heaved Sections
Panels that drop below or rise above their neighbors signal a base that has settled, washed out, or swelled. Leveling a slab without fixing that base rarely holds long, and replacement with a rebuilt base provides a lasting fix.
Trip Hazards at Joints
Uneven edges where slabs meet catch toes, wheels, and carts, creating liability for businesses and homeowners alike. When offsets exceed accessibility limits, replacing the affected panels restores a safe, compliant walking surface quickly and permanently for everyone who uses it.
Spalling and Exposed Aggregate
Flaking, pitting, and crumbling at the surface expose the stone beneath and weaken the top layer. Widespread spalling usually means the concrete itself is compromised, and coatings or resurfacing products tend to peel away from it within a season or two.
Water Pooling on the Surface
Concrete that holds water after rain has lost its intended slope. Standing water speeds wear, stains surfaces, and seeps into cracks and joints, so replacing those panels with corrected grades protects both the new work and adjacent areas.
Repairs That Keep Failing
Patches that crack, loosen, or pop out again after each season show the underlying problem was never solved. Continuing to repair the same area costs more over time than removing it once and rebuilding it correctly from the base up.
Lorem ipsum dolor sit amet, consectetur adipiscing elit.
Title 2
Give Worn Concrete a Fresh, Lasting Start
Replacement is the moment to correct everything that caused concrete to fail the first time. Mantek LLC approaches concrete removal and replacement in Mobile, AZ with that mindset, rebuilding bases, fixing drainage, and adding reinforcement so the new surface is stronger than the one it replaces. Whether you manage a commercial parking area, a busy loading zone, or a cracked residential driveway, we can assess the damage, outline your options, and phase the work around how you use the property. Visit our contact page to request a free estimate, and let us show you what a properly rebuilt surface looks like.
Quis autem vel eum
Quis autem vel eum iure reprehenderit qui in ea voluptate velit esse quam nihil molestiae consequatur, vel illum qui dolorem eum fugiat quo voluptas nulla pariatur
Real projects. Real results.
★★★★★
They did an excellent job! They were on time, the project was completed and the worksite cleaned up before leaving. I will definitely use them again.
Gary S.
★★★★★
Concrete company with a fabulous and quality jobs and prices! They are easy to trade with and they can adjust to your budget, we do recommend them a 100%
Manuel C.
★★★★★
Great Job! Fast response for a quote, started on time, asked questions and listened to the customer great! The project was done quickly and cleaned up very nice. Would hire again.
Gary V.
★★★★★
Manny and his crew did an amazing job with our barbeque concrete slab. They were professional, came out the day after I called, competitively priced and the work was clean and looks great! Will use again.
Heather M.
★★★★★
They do an awesome job! Really recommend on all the projects you can have with concrete or cement.
This walkway its beautiful
Manuel it’s really good guy and respectfully
Alexis V.
★★★★★
It went fantastic. My driveway was sinking due to soil compacting. Manny gave a a prompt quote that was better than any of the other 3 I got. He answered every email and question, and was out within 10 days of my first contact. The work was done efficiently and well. The new drive is curing as I write and I would highly recommend the company to anyone in need
Jeff H.
ASK US
FAQ's
Can a single damaged panel be replaced?
Yes. Concrete is poured in sections separated by joints, so one failing panel can usually be saw-cut out and replaced on its own. The new section is doweled or tied into its neighbors to keep the edges aligned and level.
What happens after the old concrete is removed?
First, the exposed base gets a close inspection. On every Mobile, AZ replacement, Mantek LLC removes soft material, adds fresh aggregate where needed, and compacts it firmly. Forms and reinforcement go in next, followed by the pour, finishing, and curing.
Will replacing concrete fix drainage problems?
It can, when drainage correction is part of the plan. Replacement is the ideal time to change slopes, add drains, or redirect runoff, so water no longer collects on or beneath the new surface and damages it the same way.
What surfaces does Mantek LLC replace?
Mantek LLC replaces sidewalks, parking areas, driveways, slabs, loading zones, equipment pads, curbs, and other concrete throughout Mobile, AZ and nearby cities. Our 11+ years of commercial and residential experience guide how each surface is rebuilt for its load.
Will new concrete match the color of the old concrete?
An exact match is difficult, because older concrete has weathered and different cement batches cure to slightly different shades. The contrast usually softens over months of sun exposure, and replacing full panels between joints keeps the appearance tidy.
Does replacement concrete need reinforcement?
In most cases, yes, it benefits from it. Rebar or welded wire helps hold cracks tight and spreads loads across the slab, especially in driveways, parking areas, and equipment pads that carry vehicles or heavy, concentrated weight every day.
What causes concrete spalling?
Spalling usually comes from a weak surface layer, often caused by overworking the concrete during finishing, adding water to the mix, or curing it too quickly. Corroding reinforcement close to the surface can also push the top layer apart.
How can new concrete avoid failing like the old surface?
Start with the base, drainage, and reinforcement, since those caused most original failures. Then allow proper curing time and keep heavy loads off until the concrete has gained strength, giving the replacement a far longer, more dependable service life.